2-Port Shunt-Through Impedance Measurement Basics - Phil's Lab #151
Basics of two-port shunt-through impedance measurements using a Bode 100 with a custom test PCB. Discussion on measurement technique, pitfalls, and calibration. Acquiring impedance vs frequency curves for a SMD inductors and capacitors.
Chapters:
- 00:00Intro
- 02:03Interactive Designs
- 02:302-Port Shunt-Thru Basics
- 04:02Why is This Useful?
- 05:12Bode 100
- 05:59Measurement Limitations
- 06:30What to Watch Out For
- 08:04Ground Loop Errors
- 09:31Calibration Basics
- 11:48Calibration & Test Fixture
- 12:48Measurement Set-Up
- 16:01Calibration
- 19:54Inductor Measurement
- 22:01Comparison With Manufacturer Data
- 22:46Capacitor Measurement
- 24:13Comparison With Manufacturer Data
- 25:36Outro
