Altium simulation
PeterS , 09-07-2015, 07:24 AM
Hi Robert.
I would like to ask you for simulation on Altium. I want simuling MLCC with its real characteristic. If I use simulation model from Altium library than is characteristic of capacitor looks like ideal capacitor (higher frequency -> lower impedance) but on real capacitor is on higher frequencies higher impedance. Please look for example this datasheet.http://www.digikey.com/Web%20Export/...f?redirected=1 .or some from other manufacturers. I need using ESR, ESL and impedance of real capacitor.
Can you help me use this in altium designer simulation?
Thank you
Peter Sedlacko
I would like to ask you for simulation on Altium. I want simuling MLCC with its real characteristic. If I use simulation model from Altium library than is characteristic of capacitor looks like ideal capacitor (higher frequency -> lower impedance) but on real capacitor is on higher frequencies higher impedance. Please look for example this datasheet.http://www.digikey.com/Web%20Export/...f?redirected=1 .or some from other manufacturers. I need using ESR, ESL and impedance of real capacitor.
Can you help me use this in altium designer simulation?
Thank you
Peter Sedlacko
robertferanec , 09-07-2015, 07:50 AM
Hi Peter, I am not expert for simulation in Altium. Did you try to link a SPICE model to it? Try to check: Linking a Simulation Model to a Schematic Component
Use our interactive Discord forum to reply or ask new questions.