strange stetch by assemby view
Siwei Xia , 06-30-2020, 03:39 AM
Hello,
I have some very strange sketch on the assembly view. (see attachment)
this phenomena occurrs especially by some diodes. I checked the footprint setup (the sketches by all kinds of layers) again and again, but I didnt see anything wrong.
if any one can help?
best regards
Siwei
I have some very strange sketch on the assembly view. (see attachment)
this phenomena occurrs especially by some diodes. I checked the footprint setup (the sketches by all kinds of layers) again and again, but I didnt see anything wrong.
if any one can help?
best regards
Siwei
robertferanec , 07-01-2020, 07:25 AM
I have seen those. I believe it was connected with 3D model. When I used a different 3D model, the problem was fixed.
Siwei Xia , 07-08-2020, 06:39 AM
Thanks for your feedback.
Yes, this phenomena occurs only "sometimes" and the 3D-model were generated by Altium Footprint Wizard. I just input some parameter from the datasheet.
What interesting is, the strange "line" does have a meaning - they always occurr on kathode side -_-
Any way, this is not a fatal error, the live keeps going on
Yes, this phenomena occurs only "sometimes" and the 3D-model were generated by Altium Footprint Wizard. I just input some parameter from the datasheet.
What interesting is, the strange "line" does have a meaning - they always occurr on kathode side -_-
Any way, this is not a fatal error, the live keeps going on
robertferanec , 07-09-2020, 02:25 AM
Maybe try to open the STEP file in Fusion 360 and have a look if there is something visibly wrong. Maybe it can be easily corrected:
Use our interactive Discord forum to reply or ask new questions.