Via in plane cutout
JohnsonMiller , 08-20-2018, 06:42 AM
-
robertferanec , 08-20-2018, 08:17 AM
Please, add the picture as an attachment.
robertferanec , 08-21-2018, 03:04 AM
The picture could help - so I can see the situation to which the PCB manufacturer is refereeing to.
I always adjust plane shapes as one of the last steps in PCB design and I am careful about how the edges of shapes follow VIAs. Usually I do not care much about unconnected VIAs between planes (these are usually removed anyway), but it may be important to check how VIAs which are connected to the plane are placed on the edge of the plane. I am checking for these situations manually.
I always adjust plane shapes as one of the last steps in PCB design and I am careful about how the edges of shapes follow VIAs. Usually I do not care much about unconnected VIAs between planes (these are usually removed anyway), but it may be important to check how VIAs which are connected to the plane are placed on the edge of the plane. I am checking for these situations manually.
JohnsonMiller , 08-22-2018, 08:11 AM
Hi,
Here is the image:
Here is the image:
robertferanec , 08-22-2018, 08:23 AM
I guess, you are referring to NetR4_2, correct? And what PCB manufacturer said, why this would be a problem?
Use our interactive Discord forum to reply or ask new questions.