About trouble with Import changes from...
mulfycrowh , 08-29-2024, 07:29 AM
Hi everyone,I have a baseboard project with about 1500 components.I just want to add one parameter on each component in SchLib to get it in the Pick&Place file.I started with just one component.No issue while updating the schematics.The trouble appears while importing changes from PrjPcb on PCB.AD modifies/deletes the rooms and their names defined on the PCB.Here 2 screenshots of the PCB before the import and after showing the rooms location.Thanks for help.
QDrives , 08-29-2024, 07:32 PM
In the ECO, AD also shows rooms to be added or removed.Next time uncheck changes, or if all rooms are ok, uncheck room in ECO generation.
Robert Feranec , 08-30-2024, 06:29 AM
Just adding a picture to @QDrives answer: Project -> Project options -> ECO generation -> Remove Rooms -> Ignore Differences
mulfycrowh , 08-30-2024, 09:45 PM
Thank you both! I am going to check that!
mulfycrowh , 09-20-2024, 11:03 PM
If I set Remove Rooms to Ignore Differences, it doesn't solve the issue. After Importing changes ..., AD removes 4 rooms out of 7. Why? Thanks for help.
QDrives , 09-21-2024, 12:53 AM
There may be more than 1 setting. You would need to go through the entire list.
Robert Feranec , 09-21-2024, 07:50 AM
read the ECO (the list of changes altium shows you when importing the changes) it tells you what it is trying to do and then disable that specific action
Use our interactive
Discord forum to reply or ask new questions.