1812 footprint too small
Cata , 07-05-2018, 04:04 PM
Hello everyone,
I am talking about the SMD capacitor 1812 (4532 metric) footprint.
See for example this one: C4532X7R1E226M250K with following link in DigiKey: https://www.digikey.es/products/es?k...=445-1607-1-ND
If one goes to its footprint from UltraLibrarian.com like follows: From DigiKey link --> Download from UltraLibrarian --> on the footprint click on "DetailedView", we see its footprint as attached.
Pointed with the arrow we see that half of the pad is 0.203mm !!! How comes that ? Is that a mistake ? Shouldn't the pad be 1.6mm ?
Thank you for your time !
I am talking about the SMD capacitor 1812 (4532 metric) footprint.
See for example this one: C4532X7R1E226M250K with following link in DigiKey: https://www.digikey.es/products/es?k...=445-1607-1-ND
If one goes to its footprint from UltraLibrarian.com like follows: From DigiKey link --> Download from UltraLibrarian --> on the footprint click on "DetailedView", we see its footprint as attached.
Pointed with the arrow we see that half of the pad is 0.203mm !!! How comes that ? Is that a mistake ? Shouldn't the pad be 1.6mm ?
Thank you for your time !
robertferanec , 07-07-2018, 02:39 AM
If you check datasheet from the digikey link and dimensions for C4532, it really looks like the pad width is min 0.2mm
Use our interactive Discord forum to reply or ask new questions.