USE DISCOUNT CODE
EXPERT30
TO SAVE $30 USD
xSignal
mostafa222 , 03-07-2017, 09:15 PM
Hi. I create a x signal for ddr3 signals. What is the meaning of red and yellow signal in below figure? Can you please explain what information i can take from this part?
mairomaster , 03-08-2017, 01:51 AM
The signals in the xSignals group need to be length matched withing a particular tolerance which you set.
If they are properly length match all of them will be on a white background. Also the signals that don't need to be matched (which are not a part of a length matching group for example) will be on a white background.
The signals that need length matching will be yellow/red. The colour doesn't matter - it only shows which are the shorter signals and which is the longest, or vice versa.
If they are properly length match all of them will be on a white background. Also the signals that don't need to be matched (which are not a part of a length matching group for example) will be on a white background.
The signals that need length matching will be yellow/red. The colour doesn't matter - it only shows which are the shorter signals and which is the longest, or vice versa.
mostafa222 , 03-08-2017, 03:31 AM
Thank you so much
Use our interactive Discord forum to reply or ask new questions.